Sport Truck USA Inc, parent to BDS Suspension, Zone Offroad Products, and JKS Manufacturing use a fleet of trucks and Jeeps for a wide range of prototyping, testing, and promotional purposes. From time to time when we have finished with new product development we will put these vehicles up for sale giving the public an opportunity to get a decked out truck for a great price.

Unfortunately that day isn’t today though, there are currently no vehicles for sale.
Jeep JK8 for sale

3.6L Pentastar Engine (15K miles)
A580 5-Speed Automatic Transmission
NP241OR Rock Trac T-Case
Dana 44 Front Axle, Electric Locker, 4.10 Gears, JKS Gussets
Dane 44 Rear Axle, Electric Locker, 4.10 Gears


  • 4.5″ Jspec Pro Suspension System
  • JKS Control Arms
  • JKS Hydraulic Bump Stops
  • JKS Electric Swaybar Cable Conversion
  • Fox Shocks


  • 37×12.50 Goodyear MT/R Tires
  • 17×8.5 Hutchinson Beadlocks
  • Mopar JK8 Conversion Kit
  • Nemesis Industries Front Bumper
  • Warn Zeon 10 Winch
  • Factor 55 Winch Shackle
  • Nemesis Industries Rear Bumper
  • Nemesis Industries Rock Sliders
  • TMD Cowl Hood
  • JKS License Plate Relocation Kit
  • Spraylined Bed
  • Orange and Satin Black Paint

JK8 Flyer (PDF)

Go to for additional photos and information

JKS 2013 Jeep JK for sale


If interested or for more information contact:
Matt Everline
800.637.3303 ext. 208
or email

The Zone HD is up for sale. After a couple years of faithful service, Zone Offroad Products is selling their 2011 Chevy Silverado 2500HD 4WD truck. It’s a one owner truck, bought new in fall of 2010.

Professionally maintained and always stored inside. Used for product development and company promotional vehicle throughout the summer months. One owner, bought new in fall of 2010. Runs and drives great.

Tires/wheels new last summer (package retails at $3600). Rear Air Lift remote air bag system increases hauling capacity without affecting unloaded ride quality. Amp steps make entry and exit as easy as a stock height vehicle. Hypertech programmer adds power, improves fuel mileage, adjusts shift points and recalibrates speedometer for larger tires.

  • Runs and drives great
  • 6.0L V8 Gas, auto trans
  • 45,000 miles
  • 1 owner—company show vehicle
  • Loaded interior, including leather seats
  • Factory remote start
  • 5″ Zone Offroad Products lift system
  • 37×13.50 Toyo MT on 20×9 BMF Wheels
  • Amp Research Auto-retracting Running Boards
  • Roll-n-Lock bed cover
  • Remote controlled Air Lift Air Bag system w/onboard air compressor
  • Spray-in bedliner
  • Hypertech Max Energy Power Programmer


was $36,000

Serious Inquiries Only

For more information:

Chevy HD Flyer

Contact Matt Everline at 517-279-2384, Extension 208

April 1, 2014


Coldwater, Michigan – Fox Factory Holding Corp. (Nasdaq:FOXF) (“FOX”) announced today the closing of an asset purchase transaction, through which FOX acquired substantially all of the assets and assumed certain liabilities  of Sport Truck USA, Inc. (“Sport Truck”), effective March 31, 2014. Sport Truck is a full service, globally recognized distributor of aftermarket suspension solutions. Founded in 1991, Sport Truck primarily designs, markets, and distributes high quality lift kit solutions through its brands, BDS Suspension, Zone Offroad Products, JKS Manufacturing, and 4×4 Posi-Lok.

“We are very excited to have closed the previously announced Sport Truck acquisition and welcome the Sport Truck team to the FOX family,” stated Larry L. Enterline, FOX’s Chief Executive Officer. ”We look forward to leveraging our global marketing, engineering, distribution, and supply chain resources to collectively develop next-generation, lifted truck ride dynamics solutions.”

Mr. Enterline continued, ”Looking ahead, we are well positioned to build off of our positive momentum and continue to deliver strong results in 2014. We believe industry dynamics continue to favor our product categories in premium mountain bikes and powered vehicles. This, along with a shifting consumer preference toward higher performance products will help fuel our growth long-term.”

Steve Olmstead, the President and CEO of Sport Truck, commented, ”We are excited to be joining the FOX team and believe the expected synergies between us will enable Sport Truck to more effectively design and optimize lift kit packages and quickly broaden our combined customer base utilizing FOX’s infrastructure to efficiently deliver aftermarket truck suspension products and services.”

For more on the announcement, please see the press releases from FOX:

March 6, 2014: Fox Factory Holding Corp. to Acquire Sport Truck USA

April 1, 2014: Fox Factory Holding Corp. closes Sport Truck USA Asset Purchase

Cautionary Note Regarding Forward-Looking Statements

Certain statements in this press release may be deemed to be forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. FOX intends that all such statements be subject to the “safe-harbor” provisions contained in those sections. Forward-looking statements generally relate to future events or FOX’s future financial or operating performance. In some cases, you can identify forward-looking statements because they contain words such as “may,” “might,” “will,” “would,” “should,” “expect,” “plan,” “anticipate,” “could,” “intend,” “target,” “project,” “contemplate,” “believe,” “estimate,” “predict,” “likely,” “potential” or “continue” or other similar terms or expressions and such forward-looking statements include, but are not limited to, statements about FOX’s continued growing demand for its products, FOX’s execution on its strategy to improve operating efficiencies, FOX’s optimism about its operating results and future growth prospects, FOX’s belief that its acquisition of the assets of Sport Truck will enhance FOX’s operations. Many important factors may cause FOX’s actual results, events or circumstances to differ materially from those discussed in any such forward-looking statements, including but not limited to: FOX’s ability to improve operating and supply chain efficiencies; FOX’s future financial performance, including its sales, cost of sales, gross profit or gross margins, operating expenses, ability to generate positive cash flow and ability to maintain profitability; factors which impact the calculation of the weighted average number of diluted shares of common stock outstanding, including the market price of FOX’s common stock, grants of equity-based awards and the vesting schedules of equity-based awards; FOX’s ability to develop new and innovative products in its current end-markets and to leverage its technologies and brand to expand into new categories and end-markets; FOX’s ability to increase its aftermarket penetration; FOX’s ability to maintain its premium brand image and high-performance products; FOX’s ability to maintain relationships with the professional athletes and race teams that it sponsors; the  possibility that FOX may not be able to selectively add additional dealers and distributors in certain geographic markets; the overall growth of the markets in which FOX competes, FOX’s expectations regarding consumer preferences and its ability to respond to changes in consumer preferences; changes in demand for high-end suspension and ride dynamics products; FOX’s ability to successfully identify, evaluate and manage potential acquisitions and to benefit from such acquisitions; future economic or market conditions; and the other risks and uncertainties described in “Risk Factors” contained in its Annual Report on Form 10-K or Quarterly Reports on Form 10-Q or otherwise described in the Company’s other filings with the Securities and Exchange Commission. New risks and uncertainties emerge from time to time and it is not possible for FOX to predict all risks and uncertainties that could have an impact on the forward-looking statements contained in this press release. In light of the significant uncertainties inherent in the forward-looking information included herein, the inclusion of such information should not be regarded as a representation by FOX or any other person that FOX’s expectations, objectives or plans will be achieved in the timeframe anticipated or at all. Investors are cautioned not to place undue reliance on FOX’s forward-looking statements and FOX undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.


It’s been about a year and a half since Sport Truck USA Inc (home to BDS Suspension, Zone Offroad Products, JKS Manufacturing, and 4x4 Posi-Lok) moved out of our former 45,ooo sqft facility and into our current 70,000+ sqft home right down the road in Coldwater, MI. The new larger space allowed for more floor space and taller racks, increased office space and extra acreage for future growth. While the new space offered great opportunities for the future expansion, that future is here and it only took a year to outgrow our current space. Construction is underway to add an additional 30,000 sqft of warehouse space to keep up with current demands. The new space should be functional Spring 2014.

With this expansion we’ll have over 100,000 sqft stocked full of suspension lifts and offroad accessories so we can continue to guarantee parts are in stock and ship the same day. We appreciate all the support over the years and looking forward to continuing to serve our customers in the future.

Effective November 1, 2013, JKS Manufacturing products are no longer available from TransAmerican Wholesale, 4Wheel Parts retail stores and 4WD Hardware mail-order and wholesale departments.

Please refer to for a list of dealers and wholesalers who purchase and re-distribute genuine JKS parts.

Correction to previous statement found on this page:

As pointed out by TAP Worldwide legal counsel. TAP Worldwide has only sold authentic JKS manufactured parts and that TAP Worldwide has not and does not sell “imitation” JKS manufactured parts or “cheap imported knock offs” as JKS manufactured parts.

JKS and Auto/Diesel students

JKS Manufacturing makes its first appearance at the Branch Area Careers Center (Coldwater, MI)  in the Auto/Diesel Tech program.

JKS and Auto/Diesel students
Auto/Diesel Tech students at the Branch Area Careers Center with JKS JK-8

For the 4th consecutive year Sport Truck USA, Inc. has shared one of its show vehicles with the Auto/Diesel Tech program at the Branch Area Careers Center for their 10 grade tour day. The BACC uses the 10th grade tour day to show off the programs and what they offer to juniors and seniors who attend Branch County, Michigan, area schools.

The JKS JK-8 was on hand for the event and had students asking a lot of questions about the vehicle and the parts we make. Each year the Auto/Diesel Tech program tries to assemble 3-4 custom vehicles to create some “WOW” factor and to show potential students what a career in Auto and Diesel Technologies has to offer.

Learn more about JKS Manufacturing

Sold! 1997 Jeep TJ with BDS Suspension Survived Two Ultimate Adventures!

  • Original 4.0 I6 Motor
  • Original 231 Transfer Case
  • BDS 6.5” Long Arm Suspension System
  • Mileage: Approximately 190,000
  • Custom Roll Cage
  • Custom front & rear bumpers
  • Warn Winch
  • Tube Fenders
  • High Pinion Dana 30 Front
  • Superior Axle Super 30 Front Axle shafts
  • Front ARB Lockers with 4.88 Gears
  • Rear Dana 44
  • Superior Axle Super 44 Rear Axle Shafts
  • Rear ARB Lockers with 4.88 Gears
  • Master Craft Seats with 5 point harness
  • Spider Lock Wheels (True Bead-lock)
  • 37 x 12.50 Goodyear MTR Tires with Spare
  • Hard Top (Mostly Fits)

For More Information:

1997 Jeep TJ Wrangler Flyer

Contact Matt Everline at 517-279-2384, Extension 208

FMVSS No.126 Compliant Badge

FMVSS No.126 Compliant BadgeIn an effort to reduce the risk of rollover crashes the National Highway Traffic Safety Administration (NHTSA) established the Federal Motor Vehicle Safety Standard (FMVSS) No. 126 requiring all new passenger vehicles under 10,000 lbs GVWR include an electronic stability control (ESC) system as standard equipment. FMVSS No. 126 tests new vehicle ESC systems through a series of evasive lane-change maneuvers at highway speeds to ensure the driver can maintain control in critical driving situations. Effective August 2012 this law requires aftermarket products to be compliant with these same standards.

With the new requirements in place, SEMA reached out to aftermarket manufacturers to test kit compliance of products. The initial investment to test compliance is large, so many companies have chosen to self certify their products without any formal engineering analysis. BDS Suspension and Zone Offroad, however, have been on the industry forefront working towards independent verification of all applicable suspension kits to show compliance with the new standards. Currently many of the Jeep, Dodge, and Ford suspension kits have been verified compliant and other applications continue to be tested periodically.

This accomplishment is just a small representation of the larger investment by the Sport Truck USA team to produce the safest and highest quality products on the market today. For additional information on this and other quality products available log on to our website at BDS Suspension and Zone Offroad Products are divisions of Sport Truck USA Inc.

Zone Offroad FMVSS No.126 testing BDS Suspension FMVSS No.126 testing BDS Suspension FMVSS No.126 testing

COLDWATER, Mich. — Sport Truck USA, Inc., based in Coldwater, Michigan has acquired JKS Manufacturing, a privately owned company located in Alliance, Nebraska.

JKS developed the original sway bar Quick Disconnect™ system and specializes in manufacturing innovative suspension products for Jeep® vehicles. Recreational and competitive Jeep enthusiasts know the JKS brand and products for their reliability and versatility.

“This acquisition will assist us in our ongoing efforts to strengthen our position as the leader and premiere provider of choice for Jeep® aftermarket products,” President of Sport Truck USA Steve Olmstead said. “JKS is widely respected as a result of their continued commitment to excellence and quality. Bringing JKS into the Sport Truck USA family will afford us greater flexibility in offering more products, making the buying process simpler for our customers,” Olmstead said.